LiquidMigrationWilletSpecies.h
Go to the documentation of this file.
1 //Copyright (c) 2013-2023, The MercuryDPM Developers Team. All rights reserved.
2 //For the list of developers, see <http://www.MercuryDPM.org/Team>.
3 //
4 //Redistribution and use in source and binary forms, with or without
5 //modification, are permitted provided that the following conditions are met:
6 // * Redistributions of source code must retain the above copyright
7 // notice, this list of conditions and the following disclaimer.
8 // * Redistributions in binary form must reproduce the above copyright
9 // notice, this list of conditions and the following disclaimer in the
10 // documentation and/or other materials provided with the distribution.
11 // * Neither the name MercuryDPM nor the
12 // names of its contributors may be used to endorse or promote products
13 // derived from this software without specific prior written permission.
14 //
15 //THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
16 //ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
17 //WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
18 //DISCLAIMED. IN NO EVENT SHALL THE MERCURYDPM DEVELOPERS TEAM BE LIABLE FOR ANY
19 //DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
20 //(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
21 //LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
22 //ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
23 //(INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
24 //SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
25 
26 #ifndef LiquidMigrationWilletSpecies_H
27 #define LiquidMigrationWilletSpecies_H
28 
30 #include "Math/ExtendedMath.h"
32 
38 {
39 public:
42 
45 
48 
51 
53  void read(std::istream& is);
54 
56  void write(std::ostream& os) const;
57 
59  std::string getBaseName() const;
60 
63 
64 //adhesion-specific functions
65 
68 
69 //setters and getters
73  void setLiquidBridgeVolumeMax(Mdouble liquidBridgeVolume);
74 
79 
84 
89 
93  void setDistributionCoefficient(Mdouble distributionCoefficient);
94 
99 
103  void setSurfaceTension(Mdouble surfaceTension);
104 
108  Mdouble getSurfaceTension() const;
109 
113  void setContactAngle(Mdouble contactAngle);
114 
118  Mdouble getContactAngle() const;
119 
120 private:
125 
130 
138 
143 
148 
149 };
150 
151 #endif
Definition: BaseAdhesiveForce.h:31
Defines the liquid bridge willet interaction between two particles or walls.
Definition: LiquidMigrationWilletInteraction.h:45
LiquidMigrationWilletSpecies contains the parameters used to describe a short-range force caused by l...
Definition: LiquidMigrationWilletSpecies.h:38
Mdouble contactAngle_
contact angle between particle and liquid bridge surface
Definition: LiquidMigrationWilletSpecies.h:142
LiquidMigrationWilletSpecies()
The default constructor.
Definition: LiquidMigrationWilletSpecies.cc:29
LiquidMigrationWilletInteraction InteractionType
The correct Interaction type for this AdhesiveForceSpecies.
Definition: LiquidMigrationWilletSpecies.h:41
void read(std::istream &is)
Reads the species properties from an input stream.
Definition: LiquidMigrationWilletSpecies.cc:78
void mix(LiquidMigrationWilletSpecies *S, LiquidMigrationWilletSpecies *T)
creates default values for mixed species
Definition: LiquidMigrationWilletSpecies.cc:101
~LiquidMigrationWilletSpecies()
The default destructor.
Definition: LiquidMigrationWilletSpecies.cc:56
void setSurfaceTension(Mdouble surfaceTension)
used to set the surface tension of the liquid.
Definition: LiquidMigrationWilletSpecies.cc:172
Mdouble getContactAngle() const
used to access the contact angle between particle and liquid bridge surface.
Definition: LiquidMigrationWilletSpecies.cc:209
void setLiquidBridgeVolumeMax(Mdouble liquidBridgeVolume)
used to set the Volume of the liquid bridge.
Definition: LiquidMigrationWilletSpecies.cc:119
Mdouble getSurfaceTension() const
used to access the surface tension of the liquid.
Definition: LiquidMigrationWilletSpecies.cc:185
Mdouble liquidBridgeVolumeMax_
Max volume a liquid bridge gets during formation; any excess remains in the liquid film of the partic...
Definition: LiquidMigrationWilletSpecies.h:124
std::string getBaseName() const
Used in Species::getName to obtain a unique name for each Species.
Definition: LiquidMigrationWilletSpecies.cc:91
void setInteractionDistance()
returns the largest separation distance at which adhesive short-range forces can occur.
Definition: LiquidMigrationWilletSpecies.cc:111
Mdouble liquidBridgeVolumeMin_
Minimum volume needed to form a liquid bridge.
Definition: LiquidMigrationWilletSpecies.h:129
Mdouble surfaceTension_
surface tension of the liquid
Definition: LiquidMigrationWilletSpecies.h:147
void setDistributionCoefficient(Mdouble distributionCoefficient)
used to set the distribution coefficient of the liquid.
Definition: LiquidMigrationWilletSpecies.cc:150
void setLiquidBridgeVolumeMin(Mdouble)
used to set the Volume of the liquid bridge.
Definition: LiquidMigrationWilletSpecies.cc:127
Mdouble getLiquidBridgeVolumeMin() const
used to access the Volume of the liquid bridge.
Definition: LiquidMigrationWilletSpecies.cc:142
Mdouble getLiquidBridgeVolumeMax() const
used to access the Volume of the liquid bridge.
Definition: LiquidMigrationWilletSpecies.cc:137
void setContactAngle(Mdouble contactAngle)
used to set the contact angle between particle and liquid bridge surface (in radians)
Definition: LiquidMigrationWilletSpecies.cc:193
Mdouble getDistributionCoefficient() const
used to access the surface tension of the liquid.
Definition: LiquidMigrationWilletSpecies.cc:163
void write(std::ostream &os) const
Writes the species properties to an output stream.
Definition: LiquidMigrationWilletSpecies.cc:66
Mdouble distributionCoefficient_
distribution coefficient of the liquid
Definition: LiquidMigrationWilletSpecies.h:137